FNIRSI DSO-TC3 Digital Oscilloscope Transistor Tester Function Signal Generator Three/TwoIn One Multi-function Tester

FNIRSI DSO-TC3 Digital Oscilloscope Transistor Tester Function Signal Generator Three/TwoIn One Multi-function Tester

$42.60 Sale

FNIRSI DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one. Equipped with 2.4 Inch TFT display. Built-in rechargeable lithium battery


DSO-TC3 handheld oscilloscope, 10 MS/s sampling rate, 500 kHz bandwidth. It can be used freely for both periodic analog signals and aperiodic digital signals. Equipped with one-key AUTO, the measured waveform can be displayed without cumbersome adjustment


DSO-TC3 transistor tester can identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors etc. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code


DSO-TC3 transistor tester is suitable for pairing of transistors, identification of mixed surface mount, and preliminary screening of small batch components. "Mos Test" mode can test various types of transistors and test capacitance, resistance etc


Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement


Six waveforms: sine, square, pulse stroke, triangle, ramp and DC

FNIRSI DSO-TC3 Oscilloscope - 3-in-1 Handheld Oscilloscope & DDS Signal Generator & Transistor Tester

DSO-TC3 - 01

Handheld Oscilloscope

DSO-TC3-03

 

  • DSO-TC3 oscilloscope has a real-time sampling rate of 10MS/s and a 500kHz bandwidth.
  • With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
  • Up to ±400V voltage signal can be measured.
  • Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.

 

Transistor Tester

DSO-TC3-02

 

  • DSO-TC3 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.
  • DSO-TC3 can automatically identify and measure various transistors.Including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.
  • DSO-TC3 also can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

 

Function Signal Generator

DSO-TC3-04

 

  • The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.
  • Triangle wave : 1-10KHz/0-3.3V/50%. Square wave : 1-100KHz/3.3V/50%. Pulse wave : 1-100KHz/3.3V/0-100%. Triangle wave : 1-10KHz/0-3.3V/50%. Ramp : 1-10KHz/0-3.3V/0-100%. DC 0-3.3V

 

Tool Box

DSO-TC3-06

 

  • Automatic detection of pin definition.
  • Automatically analyze NEC protocol infrared code.
  • Other functional modes: Including circuit continuity test, 0~40V input voltage measurement, PWM output,0~32V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

 

Packing list:

NO.1(Standard)
DSO-TC3 *1
Ordinary probe*1
Test hook*3
Type-C charging cable*1
Packing box*1
Manual*1

NO.2(High )
DSO-TC3 *1
P6100 High Voltage Probe*1
Ordinary probe*1
Test hook*3
Adapter*1
Type-C charging cable*1
Packing box*1
Manual*1